If you notice lines or smudge marks on your labels/tags, or if the labels/tags will not print or print blank, you may need to clean the print head and scanner To do this, grab a thermal printer cleaning pen (if your store does not have this, please ask the Help Desk for one) Open the printer by pullin…
Transcription: Alright, so say you're at production and you're printing tags that are way too dark. And since it's too dark, you're not going to be able to scan that QR code. There's a way to fix this specifically on the printer itself, where you can configure it using the feed button right here: So. What you…
Recalibrating the Zebra printer is often needed when you notice the lettering on the tags/labels is off-center. To recalibrate the Zebra printer in the production area, hold down the feed button for 2 blinks. Once you see 2 blinks, let go of the feed button and let the tags/labels feed out.
1.) First, pull the green tabs on the side of the printer towards you to open the shell 2.) Next, push the green roll holder to the side to release the roll. 3.) Now, take the old roll out of the printer. Replace it with your new roll. 4.) Make sure you clean the thermal head and scanner. Make sur…
TABLE OF CONTENTS POINT OF SALE (POS) - QUICK GUIDE ......................... How to Assign a Drawer ......................... How to Pause a Drawer ......................... How to Balance a Drawer ......................... How to Run the "End of Day" ......................... How to Correct EOD Number…