Transcription:

Alright, so say you're at production and you're printing tags that are way too dark. And since it's too dark, you're not going to be able to scan that QR code. There's a way to fix this specifically on the printer itself, where you can configure it using the feed button right here:

So. What you're going to do first is you're gonna hold down this feed button. And when you hold it down, you're going to notice that this button right here (the light next to the feed button) is going to blink. You're gonna want this to blink 6 times and I'll show you what that looks like.

So you blink once. Twice.

Three times. It's going to keep going in

sequential order until it hits six and

then we'll let go. Now it's going to print out these numbers.

So this is the darkness. You're going to want to find it until it goes to, I believe, 8. Then, you're going to hit the feed button.

Hit it again.

And now it's configured correctly, so next time you print it's going to have this 8.0 darkness.